F2GT1A180AB TPMS Tire Pressure Monitoring System Sensor 4 pack

Tips:
This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool
Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID, Pressure, Frequency，battery status

Auto Relearn:
Set tyre pressure
Start the engine
On dashboard, set the system into the relearn mode
Drive until the relearn is completed

Manual Relearn:
Engage parking brake and inflate all tires
set vehicle into the relearn mode
Use tool to activate the Left Front sensor
Repeat for RF/RR/LR tires
After activate for sensor. Relearn complete, the dashboard will show the info

OBDII RELEARN
OBDII connector is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Activate TPMS Tool on left front tire sidewall next to the valve stem
Repeat for RF/RR/LR tires (Spare)if required
Apply OBD connector to DLC
Turn ignition to ON, Press OK on TPMS Tool to transfer data to ECU
Disconnect OBD connector from DLC
Turn ignition to OFF then ON
Drive at 12 mph for up to 5 minutes
Fitment: For Ford 2015-2020 Edge, 2015-2020 Ranger, 2015-2017 F-150, 2016-2019 Flex, 2017 Fuxing, 2015-2019 Mustang, 2018-2019 Expedition, 2016-2019 Explorer, 2018-2019 Fiesta, 2017-2019 Fusion, 2017-2019 GT, 2019-2020 Transit, 2019-2020 Transit Connect, 2016-2019 Police Interceptor Utility. For Lincoln 2020 Corsair, 2016 MKS, 2015-2020 MKX, 2017-2020 Continental
OE Number: F2GT1A180AB F2GT1A150AB F2GZ1A189A GL3T1A180GB HC3Z1A189A FR3Z1A189A JX7T1A180A
Pre-programmed and Auto-Relearn TPMS Sensor: Please Refer to Your Owner’s Manual for Standard Relearn Instruction. The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle and AUTO-RELEARN, install sensors on your tires and they can automatically after you drive car for 20-30 minutes
Notice: Three year warranty. If your scan tool or OBD diagnostic tool cannot detect our sensor and display information such as True ID, Pressure, Frequency, Battery Status, etc., please do not attempt to replace the sensor. If you have any questions, please contact us and we will respond as soon as possible