Battery Charger 10-Amp 12V and 24V Smart Car Battery Charger,Trickle Charger,Battery Maintainer and Desulfator,for Car Motorcycle Lawn Mower..Lithium,LiFePO4,Lead Acid (AGM/Gel/SLA..)

Product Description

10A battery charger

10 amp smart battery charger Problem

1: Can’t reach the maximum charging current? To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery. When the battery voltage is low (for example, the 12V battery voltage is less than 11V), the system automatically charges the battery at the maximum current.

2: The LifePO4 battery is not fully charged? When the battery is fully charged, it has a callback function, reducing the charge by about 1V-2V, which is normal. Added a small current after full charge uninterrupted charging.

3: Fan noise? It is normal that the fan has wind.

10A charger parameters

AC input :100v-240v~ 50/60 hz. Output current :12V10A & 24V5A

Output voltage :12V / 24V. (normal – Max:13.2V-14.6V / 26.5V-29.2V). Lithium /LiFePO4/ lead acid (AGM,GEL,EFB, MF, Flooded, VRLA, SLA and wet battery..).

Max: Lithium :12.4V-14.6V / 24.8V-29.2V. Lead acid :14.7V / 29.4V. LifePO4:14.6V / 29.2V.

Support ah: 2AH-300AH… can have more capacity, the larger the capacity needs longer charging time.

Minimum starting voltage > 2.0 V

Power and load :MAX; 120W. Size :158 x90x50mm(6.22 * 3.54 * 1.97 inches) .Net weight: 500g

Note :1 Only charge the lithium battery with battery protection board(BMS).

2 Charge the battery below 15AH with the minimum current

🚗[Fully-Automatic battery charger ]automotive Battery Charger 10-Amp 12V and 24V Fully-Automatic Smart, It’s smaller but delivers more power, battery maintainer, trickle charger, plus battery desulfator,with Temperature Compensation,Charge or repair all 12V and 24V Lithium,LiFePO4,Lead Acid (AGM/Gel/SLA..) deep-cycle batteries, including AGM, GEL, SLA, and Flooded in cars, trucks, SUVs, motorcycles, lawnmowers, boats, marine, etc.
🏍️[High power, fast, safe and accurate charging] The battery charger uses a large backlit LCD screen to clearly display the charging state; The integrated thermal sensor detects ambient temperature and reasonably changes the charging method to eliminate overcharging in hot climates and undercharging in cold climates.
🚚[Scientific battery repair model] can help restore old/idle batteries and extend battery life. If the car battery charger does not charge the battery, use repair mode. High frequency and low frequency pulse techniques have good repair and activation effects. Note: It does not activate spent batteries or repair damaged batteries.
🛺[8 kinds of mold test charging protection, safe and reliable] The charging cable is made of high temperature resistant and oxidation resistant copper wire, which is not easy to break. With over charge/over voltage/over current/short circuit protection circuit, with over current protection, short circuit protection, reverse protection, overheat protection, over voltage protection, under voltage protection and other functions.
💕[Easy operation, intelligent memory] Car battery charging mode has memory function. After charging, the default is the status mode before the last power failure. There are no complicated steps, just plugging and charging. Note: Power connection is required, Input voltage :100-240V 50/60Hz, output voltage/current :max 12 V10A, 24 V5A