2.4GHz Wireless Microphone System XLR Mic Adapter, Audio Dynamic Transmitter and Receiver for Audio Mixer PA Speaker and DSLR Camera, 48V Phantom Power for Condenser Mic

Wireless Microphone System XLR Mic Adapter Transmitters and Receiver
𝟒𝟖𝐕 𝐏𝐡𝐚𝐧𝐭𝐨𝐦 𝐏𝐨𝐰𝐞𝐫 – Turn off the 48V switch, this audio transmitter and receiver can be used to connect dynamic microphones. Turn on the 48V switch, it can be used to connect a condenser mic. The actual usage time differs due to the power consumption of the microphones of each brand. It is recommended that you test the actual available time before the official performance to avoid affecting your normal work
𝐇𝐢𝐠𝐡 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐒𝐨𝐮𝐧𝐝 𝐓𝐫𝐚𝐧𝐬𝐦𝐢𝐬𝐬𝐢𝐨𝐧 – The wireless microphone system adopts 2.4GHz wireless frequency band, with high signal stability, low interference and short audio delay. The delay is less than 5ms, the sampling rate 24 bit/48K
𝟏𝟐 𝐇𝐨𝐮𝐫𝐬 𝐁𝐚𝐭𝐭𝐞𝐫𝐲 𝐋𝐢𝐟𝐞 – The wireless system has a built-in high-capacity battery that provides up to 12 hours of continuous use after 2 hours charge. Transmission range of up to 150ft. in open areas and the locking design of the XLR plug prevents the transmitter from being accidentally dropped
𝐗𝐋𝐑 𝐓𝐫𝐚𝐧𝐬𝐦𝐢𝐭𝐭𝐞𝐫 𝐚𝐧𝐝 𝐗𝐋𝐑 𝐑𝐞𝐜𝐞𝐢𝐯𝐞𝐫 – Works with any dynamic, harmonic or condenser microphone or wireless microphones system, audio mixer, and PA system to provide stable and reliable wireless transmission
𝐀𝐮𝐭𝐨𝐦𝐚𝐭𝐢𝐜 𝐏𝐚𝐢𝐫𝐢𝐧𝐠 – No complicated setup required, the plug & play design is very easy to use. The transmitter and receiver are automatically connected when the power is turned on. The system is small and compact